Clik here to view.
Anyone here remember this...................................... ??
I think it was 1940......... nice kerning, huh ??
View ArticleColor problem 6 color machine echo-solvant Roland XF-640
Hello , please who can help me, i have a problem since one month i have 4 printers Roland XF-640 and the suddenly all print a different colors, usually the magenta color is to much, I have tried much...
View ArticleMoving masked objects
So I do my printing basically as a hobby so I'm not very up and up on all the techniques. I bought my first motorsport template literally 7 months ago, the person I bought it from has been 0 help. I...
View ArticleSumma purchase help
Hi, New here, not sure chit chat was the correct section to post this. Looking to get into vinyl for different items, not just signs at a prosumer level. I can buy a like new used original Summacut D75...
View ArticleClik here to view.
Roland SP-300V
Hello All, Hope I am posting this in the right place. Is there any company out there that can repair a SP-300V main circuit board. Unit has lost communication with the computer. Roland place says it is...
View ArticleEpson R- series print material?
Hello just wondering on what material does the Epson R5070 resin printer prints on? Im assuming it need rolls for aqueous since its water based like Hp latex? or does it work on solvent material too?
View ArticleGeneral Formulations...
Is really good stuff. I'm used to 3M but this is WAAYYY easier to install... especially in the 100 degree heat.
View ArticleLooking for sign company to work with near Saukville-Milwaukee
I have a client that needs some signs, they tried contacting a few shops in the area and haven't had any luck getting quotes. They need a non illuminated monument sign, dimensional letters on building...
View ArticleSumma is unloading whole roll before cutting
Hello when im trying to cut a roll on the summa s2 and it always unrolls the whole roll thing before it starts cutting and its making my media crumble up. So I set the roll up then line it up well and...
View ArticleIs it just me?
Is it me or are people getting worse and worse about following up and returning phone calls? Contractors, suppliers, job applicants etc. It's busy but not that busy.
View ArticleVolume political yard signs
Hi All, My go to printer for coro signs is signs 365. I've been asked to quote on political signs 12"x24" (qty) 250. Who would you use for best price and good quality?
View Articlesigns 101 website issues?
anyone else getting error messages when posting or searching the site? "oops we ran in to some problems"
View Articlehigh temp vinyl?
customer wants to wrap his food cart. wondering if anyone has any experience with these? trying to find the best material that will handle the high temps? was going to use oracal 3951HT currently using...
View ArticleSemi Permanent Vinyl On Correx?
Just a quick one I have some corrugated plastic boards (correx) on order and wanted to get this vinyl that's rated as semi permanent. I mentioned the board has flutes and it was suggested it probably...
View ArticleHP Removable Adhesive Fabric for Interior Walls
Does anyone use the HP Removable Adhesive Fabric for Interior Walls? If so how do you like it also do you kiss-cut or overlap it .5" or different? What are some of your other favorite indoor graphic...
View ArticleClik here to view.
midwest sign bought out
did midwest sign just got bought out by Grimco?, I just call their number to place an order and someone answer, good morning thank you for calling Grimco and I new I did not call Grimco to begin with
View ArticleReprint for free?
Darn it. This makes me mad. Got a personal FB message last week from a customer/fb friend saying he wanted some signs - at 8pm. Sent me a picture with an article link. I glanced at the photo. "Danger...
View ArticleWhat Rip are most people using on their Epson S80600?
We have been using our Epson for about a month now and wondering what other Rips most people are using?
View ArticleClik here to view.
SCAM company miamisignssupply.com
Hello guys I just wanted to warn people about working with this company. I made an order for some print heads almost 60 days ago and haven’t got the print heads or a refund. I get lied to every day...
View ArticlePrint-Cut Graphics on a Rock and Roll Crate?
This is an extremely low-energy surface with an exaggerated orange peel texture. Had anyone found a great vinyl for this application? Thanks!
View ArticleLooking for standoffs
Has anyone ever seen these. Need special tool for removal, just two holes for tool.
View ArticleLooking for Jeff Minke
Hello, anybody out there know Mr. Jeff Minke from Jetitech. It's a great expert on print head repairing, but after we paid PI for our of last order it's not available at all. That's really unusual....
View ArticleCustomers in Cadillacs...
Their expectations are as glitzy as the fake gold chrome on their hood ornament, while their budget could run stiff competition with the dollar menu (which has since disappeared)... When price is the...
View ArticleNeed some extension cord ideas
What's do you all do to get power to your machines without having cords all over the ground?
View ArticleDTF Printer
Hello, I have been looking at buying a DTF printer. This will mostly be used for making transfers for t-shirts. Does anyone have one, or recommend one that would ideally be able to print at least...
View ArticleHP Latex 560 Color Consistency
We have a relatively new HP Latex 560 and are having problems with color consistency. I have several years experience with the HP Latex machines and have specific profiles setup for various stocks...
View ArticleDevice to help roll wall murals for packing?
Hi guys is there a device or something i can make to help me roll up wall murals more easily for packing? murals about 24" in width im currently just using a tube to help me roll them but when its a...
View ArticlePeople never cease to amaze me with their sneaky ways...
Guy just came in and showed me a screenshot of "HIS new logo" and asked if I could make a change to the small wording on top and some stickers. Me: Sure! do you have the art file? Him: No, I don't have...
View ArticleGama Print Pro, onyx 11 help
When I add an image, the file name shows up under the image tab in red & reads “This image has failed to rip”. Doesn’t matter the file size or type. I’ve tried removing & reloading the...
View ArticleWindow Graphics Failing
Hey Guys, I am wondering if anyone else had graphics start to peel and curl after the heatwave? We are located in the interior of BC and we recently went thru a crazy heat wave where temps got up to 50...
View ArticleXenetech laser realignment
I recently had my Xenetech laser tube recharged. Now I need it realigned in the laser. I am located on the Monterey Bay in California. Does anyone know someone who can do this on my site?
View ArticleRetrofitting HP L26500 with Ink Collector
Throwing it out there to see if there's a way to retrofit an Ink Collector on a HP L26500?
View ArticleHovering Clients
When you're onsite doing an install is there a polite way to tell your customer to leave you alone? eg. I've got 6' on material stretched out getting ready to stick it to the wall and some art director...
View ArticleAccu-Bend freedom recomendation
hello, I'M thinking to brought a accu-bend freedom bending machine for my business does anyone have any feedback about it? thanks and best regards
View ArticleBumper sticker questions?
Wondering what most of you do if someone comes asking for bumper stickers? We normally use oracal 3165 for our stickers and use 210 if they want them laminated. I think this would work but maybe be...
View ArticleHow do you guys tape the print to the take up roll?
Hi guys, how do you guys tape the print to the take up roll? because after I put the roll on the plotter and start cutting after it gets to the end it yanks the tube and sometimes messes up the...
View ArticleOutdoor removeable and reusable
Soooo, have a client who is a large regional carwash enterprise who wants to have removeable decals for when the equipment is out of order that will be temporary use outdoors, but also want them to not...
View ArticleAny Suggestions on selling a business
I have a 25+ year business consisting of full sign shop screen printing operation dtg (kornit and brother machines) emb 12 heads (2 bauridans) and have been a asi supplier and seller for 15+ years we...
View ArticleWhat causing these Reflective printed stripe peeling, only where they are...
I'm wanting you opinion why these stripes are peeling only where they are cut by hand? All the rest of the graphics seem to be sticking fine. They where printed on Oracal 5600 reflective on eco-solvent...
View ArticleXenetech laser alignment
I recently had my Xenetech laser tube recharged. Now I need it realigned in the laser. I am located on the Monterey Bay in California. Does anyone know someone who can do this on my site?
View ArticleUpgrading to Latex or Solvent inks.
Hello all, I apologize in advance for such a noobish question, but I am on the verge of buying new equipment, and my confusion is turned up to 11. However, my expectations may be unreasonable. This...
View Article
